How To Cut Your Electric Bill In Half Free Ideas part 3 Clothes Dryer | Missouri Wind and Solar

**How To Cut Your Electric Bill In Half Free Ideas part 3 Clothes Dryer | Missouri Wind and Solar**



View Time:11:28Minutes



This video shows you how to heat your home using wasted heat.
Heat and Cool your home for FREE using a clothes dryer

Missouri Wind And Solar website
The humidity level in your home should be 55 to 60 percent. If your humidity in the winter months is lower then that then the lint bucket will help to bring that humidity level up. If where you live the humidity is already higher then 60 percent in the winter months then this bucket will not work for you.
There has never been any MOLD issue since people have been using this type of lint bucket since the 1980’s.

See the step-by-step DIY Tutorial here:



332 Cobblestone Drive
Seymour, Mo. 65746

EMAIL: [email protected]
PHONE: 1-417-708-5359

Missouri Wind and Solar offers a service no other DIY wind and solar company does – system design, installation advice, and detailed personal diagrams on how to wire the system together. You’re not blindly purchasing products you *think* you might need, you’re getting true customer and technical support before and after the sale.
Hi everybody, I'm Jeff and I want to show
you how to make your own dryer lint bucket to help heat your home with your clothes dryer.
This is not for gas clothes dryers, this is for electric clothes dryers only. You can't
pump the exhaust from a gas dryer into your house, it'd create carbon monoxide. So, this
is for electric dryers only. So you need humidity in the air in your house
in the winter. You'll be able to turn your thermostat down a little bit if you can get
the humidity in your house to about 55 percent. The humidity will hold the heat in the air,
so when, say, your furnace shuts off it doesn't get cold and drafty really quick if there's
humidity in the air. You've got that humidity and it'll hold the heat. Anyway, what they have on the market now are these
small dryer vent buckets, I'm sure you've seen them, they're about this square and they've
got a place to put your dryer vent hose in the top and you fill them about half full
of water. Well, those things are just junk, okay. They don't work, they just throw out
more lint into the room than you can imagine, plus the water that you put into the bucket
evaporates very quickly and the next thing you know, it's tipping over on you. So, what I've done is made a large version
of that. I've done this a long time ago, back in the 1980's, so this isn't anything new
and I'm sure there are other people out there who have made this, but this is very inexpensive
to do. I just went to Home Depot and bought a five
gallon pail and I bought there lid, it was about four bucks for this. Another thing I
bought is what's called a dryer dock and what it is is for four inch vent pipe for dryer
vent pipe and I'll show you the side of it. Giving it a twist unlocks it. Okay, and we're
going to use this for something different. Then, I got two hose clamps and I got the
aluminum dryer venting hose. This is eight feet worth and that's all you need. This didn't cost me very much to get all of
these. So I'm going to show you how this works. Now, you can make this really quick and it
will cost you probably less than buying one of those little junky boxes for lint. And,
there's a couple of other things you do not want to do with an electric dryer. I used
to be an appliance repair man for like 25 years. Never take a nylon and put over the
exhaust pipe on a dryer and clamp it down to let heat into your house; what happens
is that nylon will fill with lint very quickly and instead it'll slow down the airflow coming
out of your dryer. So, say it used to take you a half hour to dry clothes and now you've
got this nylon sock over the exhaust pipe on the dryer and now, all of a sudden, it's
taking 45 minutes to dry your clothes, and then it's taking an hour to dry your clothes.
Well, what's happened is those nylon stockings are slowing down the airflow of the exhaust
coming out of the dryer and basically backing up all of the humidity inside of the dryer.
But, it's a bad idea. Don't ever use nylon, you cannot slow down the airflow, the exhaust,
out of any dryer. If you do, you will increase the time it takes to dry a load of clothes.
They have another little deal that fits into your exhaust pipe, it's a plastic tube like
this, a square box, and a tiny screen on the front and you flip it this way for the wintertime
and it blows the heat into your house. Those don't really work very well, the screen in
them fills up with lint right away and it's a waste of time. So, I've come up with this and I've done this
back in the 1980's and I don't know if anyone else has done it, it's just something I came
up with myself. So, I'll show you how you're gonna start.
It's really easy. This quick connect, or this dryer dock, this goes into the top of the
bucket. All you've got to do is take yourself a felt marker and go to the center of the
bucket. I'm using really simple tools, too. Just a flat black felt marker, there, and
I've got my hole. Alright, now next what I've got is my box
cutter. This is a nice little Gerber box cutter I've got, this thing is cool, you'd like one
of these. I open up boxes all the time, so I've got one it's a little clip. So, anyway,
just use a utility knife, a drywall knife, or a sabre saw to go down here and cut this
out. Anyway, I'm going to cut this out and I'll put in the dryer dock. Okay, so this is how it looks. This is a little
easier than what I did. You're gonna pop it apart and there are three screw holes in the
top of this which is pretty cool. All I'm going to do is, I have three self tapping
screws, and I'm going to screw down into this and that'll be it. You don't want to screw these things down
very tight or it'll strip it out. There you go, I've got 'er screwed in. The other piece
locks on there, bang, locked in. Now you can put your dryer vent hose right to the top
of this. Now, for the exhaust, this is what I did. Okay, so now what I need to do is cut
a whole bunch of vent holes around the outside edge of this bucket and this is very important.
We need a lot of air flow coming around the outside edge of this bucket. I've got a 15/16
inch wood bit but you can use a bigger one, just don't go any smaller than this. And remember, don't put too few because you
will slow down the exhaust on your dryer and it's going to take you a lot longer to dry
your clothes, so, put in plenty. There you go, just put one at each one of these little
ridges and now I'll go ahead and drill it out. There we go, we're all done. That's plenty
of exhaust. Now, what we're going to do is, pretty much we're almost done, just attach
the hose to the back of the dryer and we're ready to go. Now, the hose I'm using is this aluminum dryer
vent hose. This is 4 inch stuff in aluminum. Don't use that white vinyl hose if you've
got it around, as a matter of fact, that stuff is banned in a lot of places because it catches
on fire, so they use this aluminum stuff. This is eight feet worth. So, and I've bought my two four inch clamps
and, truthfully, I've probably got about twenty bucks into this altogether. All of this stuff
just comes from Home Depot. Okay, there you go. I've got my hose attached
to the bucket, you want to make sure it's nice and tight like that and then, we can
unlock it from the bucket. We'll go ahead and hook this up to the dryer. Okay, we've got the other end hooked onto
the exhaust to the dryer and it's nice if you can put this vent bucket out in another
room away from the dryer, but if you can't, you can't. Okay, now there is one more thing I have left
to do. There are several tabs on the top of this bucket and that makes it kind of hard
to unsnap and get it off. So, what I'll do is cut out every other one of these tabs and
it makes it easy to unlock it. Okay, you see what I did? I cut off every
other locking tab off from this so it's easy to take off. Now, all you do is fill this
bucket half full of water, just halfway up. Snap the lid on, use the dryer dock. Locked
on and we're all done, just turn your dryer on and dry like you normally do. All of the
lint will blow down into the water and get trapped and it won't come out into your room.
Remember, don't do this with a gas dryer, you can get carbon monoxide poisoning if you
do that. You don't ever exhaust a gas dryer into your house. This is for electric dryers
only. Now, you'll want to check the water once in
awhile and keep the bucket about half full. When it starts getting all sorta nasty and
full of lint, just pop the ring off, pop the lid off, take it out and dump it outdoors
or wherever you want to dump it. Anyway, this is part of my series on How to Cut Your Electric
Bill in Half and this here will definitely keep your furnace from running so much, you
might as well pump the heat into your house. Plus, this is going to bring a lot of humidity
into your house in the wintertime. Now, you don't want to use this in the summertime. Anyway, that's all there is to it and I'm
Jeff and this another part of my series on How to Cut Your Electric Bill in Half and
I will show you how to heat and cool your home with an electric dryer.

44 thoughts on “**How To Cut Your Electric Bill In Half Free Ideas part 3 Clothes Dryer | Missouri Wind and Solar**

  1. BREGGREN Papadoo

    Well Done VIDEO. I've Watched Many of Your Excellent 'MissouriWindandSolar' Ideas & Videos & Each One Builds Much Confidence in What You Say & Do & Have to Offer! I'm Amazed That I Can Understand What You're Saying, Every Word! Thanks! I'll Look for More!

  2. John Kearney


  3. PCA Management Services SRL

    hey Jeff thanks for sharing your knowledge I am about to puchase a wind turbine I have a solarpanel array at but need some extra power to keep my home running on batteries . what si the best option for me as a beginner ? thaks

  4. HotRockCentral

    I've been doing this for years with no mold problems but I only do a load once a week waiting for a cold day but I'm using a flannel pillow case cover instead, too lazy to do the bucket & no place to put it anyways, just shake out the pillow case every so often. Windows sweat up for awhile but dissipates pretty quick. If your doing laundry for a big family, I can see there might be an issue with moisture but seeing some of the comments here shows how retarded some ppl are & why communism is a necessary evil, some ppl are to stupid to think for themselves.

  5. david canter

    very usefull information , i have already applied the videos ive watched so far. now that iam retired keeps me something to do.thanks keep up the good work.

  6. KNIFE PLISKIN - So. Cal Bigfoot

    I just duct taped 12 blow dryers to a ceiling fan & now my mansion is warmer than a Death Valley Discotheque!!

  7. Steven Steve

    In your other video on pulling heat from attic you taped up all the "cracks" in the dryer. So if you exhaust the moist heat into the area next to the dryer wouldn't your dryer suck that moist heat back in and make it more difficult to dry wet clothes inside the dryer?

  8. Melissa Teel

    Humidity should be considered when heating a home. It is healthy to have it around 40% during normal winter temps arouns 20-40 degrees. As temps drop you do need to decrease humidity as well. If living in cold climates where it gets to -10 and below, it is best around 15%. During summer months it is not needed for obvious reasons. We are up north and generally keep it around 30 ish %. We do alter as needed and have never had issues with mold occurring. I would say at least have a way to check humidity if trying this, as mold would definately be a great concern.

  9. Part-Time Picker

    Hey thanks for the video. This is a great idea. We have a small cottage with an electric dryer and probably not much insulation in the walls.

  10. Truth fears no scrutiny 123

    I think gas burns clean. We cook with a gas stove inside the house. Should work as well.

  11. Dennis G

    Thanks for the advice this has helped immensely on my heating bill and I expanded the tip to heat a 6 1/2'height ,9'Length ,45"depth /Terrarium/Vivarium I built as the center piece in my living room
    If you use a dehumidifier like I do I gain the extra heat in my house from that source and flush the water wasting toilet with the water collected and my furnace this winter alone close to 60% less use now that I've implemented this incredible idea. Oh throw bubble wrap on your windows almost 90 % heat retention with another simple item we all throw out

  12. Scott G

    What humidity is too high for safety from mold caused by stream from the dryer? My garage in Washington State is 45 degrees and streams up with my dryer running. I don't want to cause mold in my garage.

  13. Samuel J

    Dragon video,drag on and on.humidity to the uncomfortable level,thick air,now you can cool your home with a dryer??you could let your car run in the garage for the exhaust and engine heat too.

  14. sparky9tube

    Funny guy. How am I supposed to fit that bucket behind my dryer when I have only about 4" of space behind the dryer.
    Am I'm supposed cut a 4" hole pathway (posslbly through several walls) to another room?
    Left that part out. Didn't you.
    This seems to be impractical and costly.

  15. It could be kevin

    I live in Virginia. I’m also a hvac tech I tried this in January which is our coldest/driest month. Within 30 minutes my windows were dripping wet and the drywall had water running down all over. Just get a steam humidifier and use distilled water. Way less trouble

  16. Gio Giovanni

    Yes it does warm up the house but it also fogs up the windows I guess if you don't plan on looking out your windows it's a good idea

  17. Jack Rainfield

    I don't get how the lint gets down into the water. The exhaust comes in through the top and then would bounce off the top of the water in the bucket. Then it would just go out of the holes in the lid. It seems only a small amount of the lint would end up in the water.

  18. Nat V

    I live in so cal and have been simply taking the vent hose off the back and we run our dryer at night. We always run the dryer at night anyways. All major appliances after six pm for cheaper electricity. My heater has been broken for about four years. Come winter and the house begins to drop to low sixties, we take the hose off the back and just let it enter the rest of the house. No bucket. We run a couple loads some nights to take the chill off a little. Our house is big enough to not have a big increase in humidity. I welcome some humidity as my skin gets dry and itchy with the dry air. I imagine if your house is smaller, humidity could be an issue.

  19. Jeremy morris

    I have actually done something similar for alot of my customers that live in trailers. Most of them have issues with freezing pipes during winter months so I install a T valve and send one end out of the house for summer and the other through the floor for winter. The humidity and heat helps to keep the underside of the trailer warm and prevents freezing. The ventilation from the skirting helps prevent water buildup on insulation and structural materials so no mold or rust damage done. The excess heat also helps to heat the flooring of the trailer which keeps the furnace from running as often. Thank you for the video. Definately something to keep in mind for customers with much larger homes.

  20. Cynthia Mauck

    I'm single and do laundry only once a week, so I'll pass on this suggestion. I keep my bills down by heating only the smaller bedroom – my "office" (it's a very small room). I have a small electric heater that heats that room just fine. I also have never been interested in cooking, so I rarely use the oven, just the stove top now and then. I leave things unplugged when I don't use them – tv, blu ray player, computer, monitor, modem, microwave oven, etc. I leave my thermostat at 56 degrees, so the furnace doesn't come on too often. My window coverings are cell blinds. I use only LED lights. I might try putting bubble wrap on windows – something you talked about in another one of your videos. Thank you for all the truly useful information you are posting.

  21. Premier Spray Foam KY

    Do not do this! You will cause so much mold in your home! You do not want 50% humidity in your home!


Leave a Reply

Your email address will not be published. Required fields are marked *